Expedition materials
Cut Machine Scrap from the Workshop
Machine Scrap is a distinct 1.0 material, and the Workshop is its documented point of interest target.
WHERE & HOW TO FARM
Cut Machine Scrap from the Workshop
Workshop point of interest, especially large white barrels and electronics inside panel boxes.
Before you go
- Airship access to the Workshop.
- Cutter tool.
- Cargo space for Machine Scrap.
Farming steps
- Reach the Workshop and enter its accessible work areas.
- Look for large white barrels among the workshop fixtures.
- Inspect panel boxes for electronics that can be cut free.
- Use the cutter on the barrels and suitable panel-box electronics.
- Collect Machine Scrap from each harvested target.
- Check the Workshop’s remaining rooms and fixtures before leaving.
- Store the scrap for recipes that specifically request Machine Scrap.
- Use the exact material name shown in your 1.0 inventory when planning recipes.
- Older references to Machine Parts describe a different material and should not guide this search.
Repeat, collect and use
Search another Workshop if available and needed. The recorded method does not establish that cut targets respawn, so consider each cleared Workshop a finite salvage visit.
Common mistakes
- Searching Radio Towers for this specific material: the documented target is the Workshop.
- Expecting Machine Parts to substitute for Machine Scrap: confirm the recipe’s named input.
- Cutting ordinary electronics outside the described fixtures and assuming guaranteed scrap: focus on the barrels and panel boxes.
When to stop or switch
Stop when you have the Machine Scrap required by your current recipe, or when the Workshop no longer has the named salvage targets.
Sources & fact checks
What you can get here
Open a guide to find other locations and see what the item is used for.