◈How2GetIt.Find your game ↗
WHERE & HOW TO FARM

Coal

Visible coal seam tiles on the Home Island within a Mine Control Tower’s designated area. Check the terrain in your scenario because resource placement may vary.

Before you go

Farming steps

  1. Locate a coal seam and check that it can fit inside a tower’s control area.
  2. Place the tower and inspect the covered area before designating the seam.
  3. Mark coal-bearing tiles as mining work.
  4. Assign an excavator and truck to the tower; set coal preference if the excavation zone contains other materials.
  5. Route truck deliveries to a coal buffer or a consumer that accepts coal.
  6. Check the route and destination capacity, then verify coal appears in storage or reaches its consumer.
  7. Keep the buffer visible in your supply planning so competing uses do not silently drain it.

Repeat, collect and use

Repeat while the seam has accessible coal and the receiving storage or consumer can accept it. The deposit is not an unlimited source unless your scenario settings say otherwise.

Common mistakes

  • Waiting for a coal consumer before mining: the mine can operate once its tower, designations and vehicles are set.
  • Mixing coal with unrelated excavated material: route it to an appropriate destination.
  • Ignoring a full destination: trucks cannot keep delivering into storage with no room, so free capacity or redirect output.

When to stop or switch

Pause when accessible coal is exhausted or your coal buffer has enough stock for the active consumers and further extraction would only fill storage.

Sources & fact checks

What you can get here

Open a guide to find other locations and see what the item is used for.