Runes and powers
Apply a Runestone Power to Gear
Use a prepared Runestone to transfer its Legendary power onto eligible gear, completing the second half of Rune transmutation.
WHERE & HOW TO FARM
Apply a Runestone Power to Gear
Theo’s Transmuter in town.
Before you go
- A Runestone already bearing the Legendary power you want to use.
- A compatible target item for that power.
- 50 Champion’s Crowns for the application transmutation.
- Access to Theo’s Transmuter.
Farming steps
- Choose the Legendary power and identify the gear item you want to improve.
- Check that the Rune and target item are compatible before using materials.
- Keep the Rune and target item in your inventory, along with 50 Champion’s Crowns.
- Open Theo’s Transmuter in town.
- Place the power-bearing Rune, target gear, and required Crowns in the transmutation interface.
- Review the displayed inputs and result, then complete the application.
- Inspect the resulting item to confirm the power is present, and equip or store it as needed.
- Reserve Crowns for both stages when planning from scratch: extraction and application each cost 50.
- Keep the source Rune until you are certain of the target item and compatibility.
Repeat, collect and use
Repeat for each Rune power you want to apply to another item; each application requires another 50 Champion’s Crowns.
Common mistakes
- Treating extraction as if it also applies the power to gear; extraction creates the Rune, and application is a separate transmutation.
- Starting without the second 50 Crowns; gather the application cost before opening the recipe.
- Using an incompatible target; verify the Rune’s allowed item type in the interface first.
When to stop or switch
Stop once the desired power is on the intended gear, or pause until you have a compatible target and the required Crowns.
Sources & fact checks
What you can get here
Open a guide to find other locations and see what the item is used for.