◈How2GetIt.Find your game ↗
WHERE & HOW TO FARM

Electromagnetic Power

An electromagnetic power hotspot on a planet, found in Survey mode.

Before you go

Farming steps

  1. Switch the Multi-Tool to Survey mode and select electromagnetic power detection.
  2. Follow the signal to the hotspot and identify its center marker.
  3. Check whether the marker lies within the base build area; extend the boundary if needed.
  4. Place Electromagnetic Generators near the hotspot center.
  5. Run electrical wiring from the generators to the base grid and the equipment that needs power.
  6. Add batteries if the layout needs stored power, then inspect powered equipment to confirm the connection.
  7. Use the powered grid for extractors or other base functions.

Repeat, collect and use

This is a persistent base power installation rather than a harvested stack. Once built and connected, it continues supplying the base grid; revisit if you expand or alter the network.

Common mistakes

  • Placing generators far from the hotspot reduces output; move them closer to the center marker.
  • A generator without a complete electrical connection cannot power distant equipment; connect it into the grid.
  • Assuming a nearby hotspot is inside the base boundary can block placement; extend the build area where necessary.

When to stop or switch

Stop when the base grid powers the equipment you intend to run and its status is stable; expand generation only if additional equipment needs power.

Sources & fact checks

What you can get here

Open a guide to find other locations and see what the item is used for.