An Electromagnetic Generator supplies base power from a planetary hotspot, supporting powered extractors and other equipment without relying on a small local fuel supply.
PC / Global, current live version
WHERE & HOW TO FARM
Where to farm
An electromagnetic power hotspot on a planet, found in Survey mode.
Find an electromagnetic power hotspot with the Survey Device, then place generators close to its center and wire them into the base grid. The hotspot is the source; the electrical wiring carries its output to equipment. If the site lies beyond your current build area, extend the base boundary before placing generators. Check the live grid before depending on it for production.
Base Computer and base-building access near the hotspot.
Electrical wiring and any needed batteries for the planned grid.
Switch the Multi-Tool to Survey mode and select electromagnetic power detection.
Follow the signal to the hotspot and identify its center marker.
Check whether the marker lies within the base build area; extend the boundary if needed.
Place Electromagnetic Generators near the hotspot center.
Run electrical wiring from the generators to the base grid and the equipment that needs power.
Add batteries if the layout needs stored power, then inspect powered equipment to confirm the connection.
Use the powered grid for extractors or other base functions.
Farming tips
Place generators near the hotspot marker because output falls as placement moves away from the center.
Keep wiring visible and traceable while building; it makes disconnected sections easier to spot.
Repeat, collect and use
This is a persistent base power installation rather than a harvested stack. Once built and connected, it continues supplying the base grid; revisit if you expand or alter the network.
Common mistakes
Placing generators far from the hotspot reduces output; move them closer to the center marker.
A generator without a complete electrical connection cannot power distant equipment; connect it into the grid.
Assuming a nearby hotspot is inside the base boundary can block placement; extend the build area where necessary.
When to stop or switch
Stop when the base grid powers the equipment you intend to run and its status is stable; expand generation only if additional equipment needs power.
