◈How2GetIt.Find your game ↗
WHERE & HOW TO FARM

Kindlevine Stem Fuel Supply

Kindlevine patches for the initial seed and stem supply, followed by a Planter and Thresher setup on the factory floor.

Before you go

Farming steps

  1. Harvest Kindlevine by hand and collect the plant output for the initial run.
  2. Feed harvested Kindlevine into a Thresher to produce seed and Kindlevine Stems.
  3. Place Planters and supply them with Kindlevine Seed and their listed inputs.
  4. Connect the Planters’ crop output to the Thresher so stems and new seed are produced continuously.
  5. Use a Filter Inserter or separate routes to send seed back to the Planter supply and stems to a dedicated buffer.
  6. Connect the stem buffer to the fuel consumer you currently operate, and watch for a rising or falling stock.
  7. Add crop capacity only if the fuel consumer regularly empties the stem buffer.

Repeat, collect and use

Repeat through the Planter-to-Thresher loop while seeds and inputs are available. The line requires ongoing crop production and output space; harvested patches are not a guaranteed infinite source.

Common mistakes

  • Routing stems to planters: seeds are the planting input, while stems serve other uses such as fuel.
  • Failing to separate Thresher outputs: filter the mixed stream before it reaches consumers.
  • Expanding without enough seed return: stabilize the seed loop before adding planters.

When to stop or switch

Stop scaling when the stem buffer sustains the current fuel demand; expand the crop line only if that reserve repeatedly runs low.

Sources & fact checks

What you can get here

Open a guide to find other locations and see what the item is used for.