◈How2GetIt.Find your game ↗
WHERE & HOW TO FARM

Logs to Planks

A Sawmill on a reachable path near log storage and the district’s plank users.

Before you go

Farming steps

  1. Place the Sawmill where logs can reach it from a Log Pile or nearby harvest area.
  2. Check its required operating conditions in-game and provide power if the building requires it.
  3. Staff the mill and select or confirm its plank production setting.
  4. Make sure logs are available to the Sawmill and that its output has storage space.
  5. Inspect the building status and nearby inventories to confirm planks are being produced and moved.
  6. Route planks to construction or production needs through local storage and hauling.
  7. Retain enough raw logs for other recipes or construction demands before expanding plank production.

Repeat, collect and use

The conversion is repeatable while logs, workers, operating conditions, and output capacity remain available. Continue replenishing logs and moving planks to current users.

Common mistakes

  • Building a mill without a log route: connect it to a reachable source or storage.
  • Ignoring power or staffing requirements: verify the building is operating before increasing supply.
  • Using all logs for planks: retain a raw-log reserve for other needs.

When to stop or switch

Stop production when plank storage meets current construction needs or log reserves are low; restart when a new demand appears and the raw-log supply can support it.

Sources & fact checks

What you can get here

Open a guide to find other locations and see what the item is used for.