◈How2GetIt.Find your game ↗
WHERE & HOW TO FARM

Reservoir and Field Irrigation

A constructed retaining area upstream of a crop field, with channels or controlled outlets that reach suitable farmland.

Before you go

Farming steps

  1. Inspect elevations from the source to the planned field so the route can carry water to the target blocks.
  2. Build retaining structures to hold map water and leave a controlled route toward irrigation.
  3. Direct water through channels or terrain openings toward the field.
  4. Check in-game that crop blocks become suitable and irrigated before assigning crops.
  5. Observe what happens downstream and adjust outlets if the field or other users lose needed flow.
  6. Before drought, verify the retained level and the full route to the field.
  7. Recheck irrigation after adjusting structures or when water levels change.

Repeat, collect and use

Retain water during suitable flow, direct it to fields, and inspect the reserve and irrigation route before dry periods. The exact design depends on the map’s terrain and water source.

Common mistakes

  • Building a basin without an outlet to the crops: check the complete route to the field.
  • Assuming nearby retained water irrigates every elevation: verify crop-block status and adjust the route.
  • Using reservoir water as a substitute for Water Tanks: pump map water into tanks when drinkable Water is needed.

When to stop or switch

Stop enlarging the reservoir or field once the current route maintains suitable crop blocks and leaves enough water for other users; reduce field area if the source cannot support it.

Sources & fact checks

What you can get here

Open a guide to find other locations and see what the item is used for.